Controllers

Titan Controls Apollo 8 - 2 outlet Mechanical Timer

The Apollo? 8 – 24 hour timer is the perfect timing solution for your hydro systems. With two outlets and a 15 Amp capacity, it’s easy to set to run your pumps, fans, etc. The Apollo? 8 has 96 non-detachable 15 minute trippers and can be configured in numerous timing schedules to meet the most demanding timing requirements. Two (2) outlets. 15 minute intervals. Heavy duty construction. Easy to use & simple to operate. Enclosure resists dust, rust and moisture. 15 Amps maximum/120 Volts/60 Hz.

Titan Controls Apollo 10 - Analog Timer

The Apollo? 10 – 240 Volt/24 hour timer is the perfect timing solution for your hydroponic systems. With a 10 amp capacity, it’s easy to set to run your pumps, fans, etc. The Apollo? 10 has 96 non-detachable 15 minute trippers and can be configured in numerous timing schedules. One (1) outlet with 15 minute intervals. Heavy duty construction that is easy to use & simple to operate. Enclosure resists dust, rust and moisture. Only the highest quality components are used. 10 Amps maximum/240 Volts/60 Hz.

Hydrofarm - 8 outlet powerstrip w/timer

More power! Up your amperage without risking blowing an outlet or frying your electronics. Employ the Hydrofarm 8-outlet surge-protected power strip to corral everything you need to stay plugged in. With four timed and four constant outlets, you’ll have a place for every plug.

Features

4 timed, 4 constant outlets
Power indicator
Surge protector
6′ power cord
Circuit breaker switch for safety

Autopilot Dual Outlet 7 day timer

Using a timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications. This model has two outlets.

Features

1 second on/off
Up to 8 on/off cycles per day
Controls two outlets simultaneously
15A/1725W
UL-listed

Autopilot 4-Light High Power HID Controller 4000W (120V/240V), 30A

Control multiple lights from one timer or controller device. Power is wired directly into the four-outlet timer box and all of the outlets are controlled by one detachable 120V trigger cable. Rated for 30 amps at 120/240 volts. The trigger cable can be plugged into a standard 24-hour timer or environmental controller. Three year no hassle warranty.

APCL4DX has four 120/240 volt style outlets which allow running your ballasts at 120/240 volts without having to change out your ballast power cords.

FEATURES:

4000W 4-light controller
Premium quality industrial grade relay
X-style outlets allow 120V or 240V ballast operation
30A maximum
Attached 120V trigger cable
Improved terminal blocks

Autopilot 8-Light High Power HID Controller, 8000W (120/240V), 60A

Control up to eight lights from one timer or controller device. 240V power is wired directly into the eight outlet timer box, and all of the outlets are controlled by one detachable 120V trigger cable. Rated for 60 amps at 120/240 with eight 120/240V X-style receptacles. The light controller is backed by a hassle free 3 year warranty.

APCL8DX has eight 120/240 volt style outlets which allow running your ballasts at 120/240 volts without having to change out your ballast power cords.

FEATURES:

8000 Watt, 8 light controller
Premium quality industrial grade relay
X-style outlets allow 120V or 240V ballast operation
60 Amp maximum (30 amps x 2 relays)
Attached 120V trigger cable
Upgraded terminal blocks

Active Air Fan Speed Adjuster

Hydrofarm's Fan Speed Adjuster was designed especially for centrifugal fans. This means it will help prevent damage to fan motors, ensuring longer life. (Meant for use with brushless motors, and all Hydrofarm inline fans, not booster fans)

It will correctly and precisely adjust the speed of centrifugal fans. These controllers are more sensitive than any on the market, and are compact and built to last.

Features

Internal electronic auto-resetting circuit breaker
State-of-the-art electronics throughout
Rated for 350 Watts max
120VAC voltage capacity